FT1 - The Mount Adapter for Nikon 1 series (니콘 1 전용 마운트 어댑터 FT1)

The FT1 mount adapter allows NIKKOR F mount lenses to be used with Nikon 1 cameras equipped with a Nikon 1 mount. The angle of view of an F mount lens mounted on the FT1 is equivalent to that of a 35mm format lens with a focal length about 2.7 x longer.

The FT1 can be used with more than 60 lenses, representing almost all the NIKKOR lenses currently on the market.

It almost goes without saying that it also supports autoexposure/autofocus and vibration reduction. Electronic rangefinding is available in manual focus mode.You can also explore the new forms of expression offered by the Nikon 1's unique Motion Snapshot mode.

The adapter can be used with the following F mount NIKKOR lenses, including DX lenses but excluding IX-NIKKOR lenses, lenses for the F3AF, non-AI lenses, teleconverters, and auto extension rings. AI Nikkor 20mm f/2.8, AI Nikkor 24mm f/2.8, and PC-E NIKKOR 24mm f/3.5D ED lenses can not be used. *2Autofocus is available only with AF-S lenses; other lenses support manual focus only. Set the camera focus mode to AF-S (the camera will not focus in other autofocus modes). The only AF-area mode available is Single-point AF and the camera focuses on the subject in the center focus point only. *3Available with VR lenses. *4Motion Snapshots can be recorded only when an AF-S lens is attached and AF-S (Single AF) is selected for focus mode and then only when the camera is in focus. Available only when autofocus is used with AF-S lenses.